ISO 69:1998 pdf download - Cinematography - 16 mm motion-picture and magnetic film - Cutting and perforating dimensions 1 Scope This International Standard specifies the cutting and perforating dimensions for 1 6 mm motion-picture and magnetic films...
ISO 62:2008 pdf download – Plastics – Determination of water absorption
ISO 62:2008 pdf download - Plastics - Determination of water absorption 1 Scope 1.1 This International Standard describes a procedure for determining the moisture absorption properties in the “through-the-thickness” direction of flat or curved-form solid plastics. This...
ISO 60:1977 pdf download – Plastics – Determination of apparent density of material that can be poured from a specified funnel
ISO 60:1977 pdf download - Plastics - Determination of apparent density of material that can be poured from a specified funnel 1 SCOPE AND FIELD OF APPLICATION This International Standard specifies a method of deter- mining the...
ISO 55:1977 pdf download – Seedlac – Specification
ISO 55:1977 pdf download - Seedlac - Specification A.2.3.1 Place 1 25 ml of the alcohol (A.2.1 ) in the flask (A.2.2.3) and a new cartridge (A.2.2.5) in the siphon tube (A.2.2.2). Introduce the siphon tube into...
ISO 53:1998 pdf download – Cylindrical gears for general and heavy engineering – Standard basic rack tooth profile
ISO 53:1998 pdf download - Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile 1 Scope This International Standard specifies the characteristics of the standard basic rack tooth profile for cylindrical involute gears...
ISO 49:1994 pdf download – Malleable cast iron fittings threaded to ISO 7-1
ISO 49:1994 pdf download - Malleable cast iron fittings threaded to ISO 7-1 1 Scope This International Standard specifies requirements for the design and performance of malleable cast iron threaded pipe fittings These fittings are for general...
ISO 48:2010 pdf download – Rubber, vulcanized or thermoplastic – Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 48:2010 pdf download - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) 3.3 apparent hardness hardness obtained using the procedures described in methods N, H, L and M on...
ISO 48:1994 pdf download – Rubber, vulcanized or thermoplastic – Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 48:1994 pdf download - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) Method H: The appropriate method for test pieces of thickness greater than or equal to 4 mm...
ISO 48-4:2018 pdf download – Rubber, vulcanized or thermoplastic – Determination of hardness
ISO 48-4:2018 pdf download - Rubber, vulcanized or thermoplastic - Determination of hardness 10.2 Checking using standard rubber blocks 1) Press the instrument against a suitable flat, hard surface (e.g. glass) and adjust, where possible, the reading...
ISO 37:2017 pdf download – Rubber, vulcanized or thermoplastic – Determination of tensile stress-strain properties
ISO 37:2017 pdf download - Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties 7.1 Dies and cutters All dies and cutters used shall be in accordance with ISO 23529. Dies for preparation of dumb-bells shall...