ISO 4990:2015 pdf download – Steel castings – General technical delivery requirements

03-05-2022 comment

ISO 4990:2015 pdf download – Steel castings – General technical delivery requirements
1 Scope
This International Standard specifies the general technical delivery requirements for the supply of steel, nickel, and cobalt alloy castings, including the requirements for the selection and preparation of samples and test pieces. When a material or product standard differ from this delivery specification, the material or product standard shall apply. In the case of investment castings, ISO 16468 will apply. This International Standard also specifies a group of supplementary requirements which may be applied to steel, nickel, and cobalt alloy castings. These requirements are provided for use when additional testing or inspection is desired and apply only when individually specified by the purchaser.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 404:2013, Steel and steel products — General technical delivery requirements
ISO 3651-2, Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 4948-1, Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
ISO 4986, Steel castings — Magnetic particle inspection
ISO 4987, Steel castings — Liquid penetrant inspection
ISO 4992-1, Steel castings — Ultrasonic examination — Part 1: Steel castings for general purposes
ISO 4992-2, Steel castings — Ultrasonic examination — Part 2: Steel castings for highly stressed components
ISO 4993, Steel and iron castings — Radiographic inspection
ISO 6506-1, Metallic materials — Brinell hardness test — Part 1: Test method
ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
ISO 6892-2, Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
ISO 6929:2013, Steel products — Vocabulary
ISO 10474, Steel and steel products — Inspection documents
ISO 11970, Specification and approval of welding procedures for production welding of steel castings
ISO 11971, Steel and iron castings — Visual examination of surface quality
ISO 14284, Steel and iron — Sampling and preparation of samples for the determination of chemical composition
4.1.1 A description of the casting(s) by pattern number and/or drawing. When a pattern is supplied, a complete list of the pattern equipment should be included. When a drawing is not supplied, the casting is purchased on the basis of the pattern. In that case, the foundry shall not be responsible for the dimensions of the part. NOTE Machining allowances, dimensional tolerances, and geometrical tolerances can be selected from ISO 8062-3. All modifications to be made to the drawing, for the technical requirements of the manufacturer, shall form the subject of an agreement between the manufacturer and the purchaser.
Submit the castings and test blocks to a new heat treatment within the limits of the material standard and then carry out all the tests required in the material standard on the test blocks. In any case, the castings and test bars shall not be submitted to more than two additional heat treatments (excluding tempering) without the approval of the purchaser.

Download Link Download
PS: If you don't mind, please turn off your ad blocker.


Anonymous netizen Fill in information