ISO 1984-0:1984 pdf download – Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle

03-01-2022 comment

ISO 1984-0:1984 pdf download – Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle
This part of ISO 1984 defines the machining processes that can be carried out on milling machines with table of fixed height, with horizontal or vertical spindle, and describes the different types of machines. Milling machines with table of variable height are covered by ISo 1701. This part of ISO 1984 also gives a terminology for the main elements of the machine. NOTE – In adition to terms used in the three official ISO languages (English, French and Russian), this International Standard gives the equivalent terms in German, Italian, Dutch, Spanish and Swedish; thesc have becn included at the requcst of Technical Committee ISO/TC 39 and are published under the responsibility of the Member Bodies for Germany, F.R. (DIN), Italy (UNI), the Netherlands (NNI), Spain IIRANOR) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.
2 References
ISO 1701 IO. Test conditions for milling machines with table of variable height, with horizontal or vertical spindle – Part 0 : General introduction.
ISO 3855, Milling cutters – Nomenclature.
3 Definitions of the machining processes that can be carried out
3.1 Milling operations
Milling is a machining operation which consists of removing material by means of a rotary tool called a “milling cutter” of which there are several different types.
The usual milling operations can be divided into three categories :
– slab milling operations (see figure 1);
– face milling operations (see figure 2);
– end milling operations (see figure 3) .
3.2 Other operations
In addition to normal milling operations as described in 3.1, other operations such as boring and metal slitting (by the use of a metal slitting saw) may be carried out on milling machines.
4 Description of machines
In milling machines with a table of fixed height and with a horizontal or vertical spindle, the bed is rigidly fixed to the column (see figures 4 and 5). In this type of machine, the cutting movement is given by the spindle, the axis of which is horizontal or vertical. The feed movements are as follows.

Download Link Download
PS: If you don't mind, please turn off your ad blocker.

LEAVE A REPLY

Anonymous netizen Fill in information